ImageWriter II - for a good letter quality font use the LaserWriter's Courier font and print your document in high quality. (To print a letter written in 12 point you must have the same 24 point font installed in your system file.)
</text>
</content>
<name></name>
<script></script>
</card>
card_8550.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Multiple document printing - click on the document you want to print first. Now hold down the SHIFT KEY and click on the document you want printed second - and so on - when you have selected all the documents you want printed, pull down the file menu and release the mouse button on PRINT. All the documents will print out in the order they were selected. (Sometimes you may get a blank sheet of paper in between documents.)
</text>
</content>
<name></name>
<script></script>
</card>
card_8283.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Printing - with the ImageWriter II - using the ImageWriter drivers 2.1 or 2.2 you can get bidirectional printing by holding down the SHIFT, OPTION, and CAPS LOCK keys while clicking the OK button in the Print dialog box.
</text>
</content>
<name></name>
<script></script>
</card>
card_8013.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Printing - to avoid the ImageWriter scrolling a blank piece of paper through - go to the Print menu and fill in the From and To boxes with the numbers of the first and last pages you are going to print. Do this even if you are printing just one page. "From" 1 "to" 1.
</text>
</content>
<name></name>
<script></script>
</card>
card_7740.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Printing - still have a few lines left to print and the red light comes on - carefully press the Select button one line at a time and it will finish your page.
</text>
</content>
<name></name>
<script></script>
</card>
card_7636.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
(without the spacing in between words) - click at the beginning of the document and SHIFT click at the end. Go to the Font menu and select Monaco then go to the Style menu and select 12 point.
</text>
</content>
<name></name>
<script></script>
</card>
card_7334.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Printing - to avoid the ImageWriter scrolling a blank piece of paper through - go to the Print menu and fill in the From and To boxes with the numbers of the first and last pages you are going to print. Do this even if you are printing just one page. "From" 1 "to" 1.
</text>
</content>
<name></name>
<script></script>
</card>
card_5870.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Imagewriter - you do not have to remove your pinfeed paper in order to use single sheets of paper. (Roll your pinfeed paper backwards as far as it will go before coming off the pins.)
</text>
</content>
<name></name>
<script></script>
</card>
card_5520.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Imagewriter - (original) overheating - never print more than 1 page of a document at a time that contains more than 25% of solid black areas without giving the print head a chance to cool. (This tip does not apply to the ImageWriter II.)
</text>
</content>
<name></name>
<script></script>
</card>
card_4555.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
ImageWriter II - self testing - draft mode - turn off the printer. Now hold down the on/off and form feed buttons, turn the printer back on and release both buttons simultaneously. Once the printer is doing a self-test in draft mode, you can test it out in standard mode. Press the line feed button (will pause printout), then press the print quality button
(puts the printer into standard mode). Now press the line feed button again. Once the printer is doing a self-test in standard mode, you can test high-quality mode. Press the line feed button, (pausing the printout), then press the print quality button
(puts the printer into high-quality mode). Now press the line feed button again and you will get a self-test in high-quality mode. To end the self-testing just turn the printer off by hitting the on/off switch.
</text>
</content>
<name></name>
<script></script>
</card>
card_4118.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
ImageWriter II - default settings - ignore the switches labeled SW1 (the Mac overrides them). The group labeled SW2 should be set as follows: 1&2 closed, 3&4 open, 5 closed, and 6 open.
</text>
</content>
<name></name>
<script></script>
</card>
card_3994.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Crashes - Printer and Modem - if both your printer and modem stop working it may be due to a recent power outage or system crash. Remove the battery in the back of the Mac for a few minutes then put it back in again. Don't forget to reset your clock.
</text>
</content>
<name></name>
<script></script>
</card>
card_3010.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
Cleaning - Imagewriter & disk drives - several people have recommended using a Black & Decker Dust Buster for sucking dust and dirt out of the Imagewriter and the Mac. To suck dust out of the Mac use the disk drive opening.
